GNEE A213 T11 Tube Supply Range
Manufacture:Seamless process ,Hot-finished or Cold-finished
Wall thickness(WT): 0.9 mm——12.7 mm.
Outer diameter (OD): 12.7 mm——127 mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
GNEE Service
1-MARKING, TOLERANCES AND ALL RELEVANT TEST REPORTS TO STRICTLY FOLLOW AND SUPPLIED IN ACCORDANCE WITH APPLICABLE ASTM STANDARD.
2- TUBES TO BE EDDY CURRENT TESTED.
3-TUBE SHOULD BE PROVIDED WITH END CAPS (FITTED).
4-MTC REQUIRED ACC TO EN10204/3.2.
5-HEAT NO MUST BE STENCILED ON THE TUBES.
6-TUBES SHALL BE SUPPLIED WITH RUST PREVENTIVE OIL COATING
7-TUBES TO BE TRANSPORTED IN PROPER STORAGE CONTAINER
8- GNEE PROVIDE THE PROCEDURE FOR LONG TERM STORAGE OF TUBES.
.jpg)
.jpg)
