.jpg)
.jpg)
.jpg)
ASTM A335/ASME SA335 P5C ALLOY STEEL PIPE
ASTM A213 Stainless Steel 347H Boiler Tubes in different sizes, grades and thickness as per customized requirements given by our clients.
Fluid pipe is a steel pipe with a hollow section and no welds from beginning to end.
Fluid pipe is a kind of economical cross-section steel, mainly used to transport fluids, such as oil, natural gas, coal gas, water and certain solid materials. Compared with solid steel materials such as round steel, fluid pipes are lighter in weight when they have the same bending and torsional strength.
Therefore, it is also widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile transmission shafts, bicycle frames, and steel scaffolding used in construction.
Standard: GB/T8163-1999, ASTM A53-98, JIS G3452-1998, JIS G3454-1998, ASTM A106, DIN 1629-1984
Application: For conveying of petroleum, gas and other fluids
Tolerance on Dimensions
| Pipe types | Pipe Szie(mm) | Tolerances | |
| Hot rolled | OD | All | ±1% (min ±0.50mm) |
| WT | All | +15%, -12.5% | |
| Cold drawn | OD | 6～10 | ±0.20mm |
| 10～30 | ±0.40mm | ||
| 30～50 | ±0.45mm | ||
| >50 | ±1% | ||
| WT | ≤1 | ±0.15mm | |
| >1～3 | +15% -10% | ||
| >3 | +12.5% -10% | ||
Chemical composition and mechanical properties
| Standard | Grade | Chemical composition | Mechanical Properties | |||||||||
| C | Si | Mn | P | S | Cr | Ni | Cu | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | ||
| GB/T8163 | 10 | 0.07-0.14 | 0.17-0.37 | 0.35-0.65 | ≤0.035 | ≤0.035 | ≤0.15 | ≤0.25 | ≤0.25 | 335-457 | ≥205 | ≥24 |
| 20 | 0.17-0.24 | 0.17-0.37 | 0.35-0.65 | ≤0.035 | ≤0.035 | ≤0.25 | ≤0.25 | ≤0.25 | 410-550 | ≥245 | ≥20 | |
| Q345 | 0.12-0.20 | 0.20-0.55 | 1.20-1.60 | ≤0.045 | ≤0.045 | - | - | - | 490-665 | ≥325 | ≥21 | |
